CUTLERY DRYER Models JET - MIG
ATTENTION!:
damaged or worn parts must be
carried out by qualified personnel. In
this case, contact the dealer's service
centre.
PROHIBITED!: It is prohibited to carry
out maintenance and/or cleaning
while the machine is in operation.
Prolonged periods of disuse
If the machine is not going to be used for an
extended period of time (over six months) you
should:
• Disconnect the machine from the electrical
power supply
• Vacuum the corncob out of the tunnel
• Perform thorough cleaning inside and out
• Move the machine, if possible, to a clean
and ventilated area
• Seal the machine in a multi-layer nylon bag, if
possible opaque (black).
CDJET-MIG-T-00-07
Use and maintenance manual
Replacement
of
any
Page 10 of 20
CE