Maintenance; Guarantee Terms; Guarantee And Warranty Conditions - Steca Grid 300 Instructions D'installation Et De Service

EN
8

Maintenance

WARNING!
Risk of death by electrocution!
Do not open the housings of the devices under any circum-

stances.
Work on the inverter may only be performed by qualified

personnel in accordance with the legal regulations.
Steca products do not require any particular maintenance.
There are no components in the Steca inverter which require
maintenance to be carried out by the installer or user.
Any work on the inverter must always be performed by a
registered electrical contractor and in accordance with all
valid legislation.
The casings of the inverter must never be opened for safety
reasons.
The Steca products have an extensive service life. The compo-
nents are made from recyclable materials. When the product
reaches the end of its service life, it must be disposed of
according to current regulations and recycling practices.
9 Guarantee and warranty
conditions
Warranty conditions for products from Steca Elektronik
GmbH
1. Defects in materials and workmanship
The warranty only applies to defects in materials and work-
manship, insofar as these can be attributed to inadequate,
professional ability on the part of Steca.
Steca reserves the right at its own discretion to repair, adapt
or replace the faulty products.
2. General information
In accordance with statutory regulations, there is a -year
guarantee on all products for the customer.
For this Steca product, we assume a voluntary 5-year warran-
ty to the specialist dealer from date of invoice or receipt. This
voluntary warranty is valid for products that were sold within
a country of the EU.
The legal guarantee entitlements are not restricted by the
warranty.
735.794 | 10.10
33