Exclusion Of Liability - Steca Grid 300 Instructions D'installation Et De Service

• Make sure that the permitted ambient conditions at the
installation site – in particular, the specified protection
class – are not exceeded.
• Factory labels and markings may not be altered, removed
or rendered unreadable.
• Before connecting the device, make sure that the power
supply (both DC and AC) matches the specifications on
the type plate.
• Make sure that all devices which are connected to the
inverter conform to the technical specifications of the
inverter.
• Secure the device against unintentional start-up.
• Installation work on the inverter may only be carried out
when they are disconnected from the grid and the photo-
voltaic generator.
• Protect the inverter against short-circuiting.
2.4

Exclusion of liability

The manufacturer cannot monitor compliance with this
manual as well as the conditions and methods during the in-
stallation, operation, usage and maintenance of the inverter.
Improper installation of the system may result in damage to
property and, as a result, to bodily injury.
Therefore, we assume no responsibility and liability for loss,
damage or costs which result or are in any way related to
incorrect installation, improper operation and incorrect use
and maintenance.
Similarly, we assume no responsibility for patent right or
other right infringements of third parties caused by usage of
this inverter.
The manufacturer reserves the right to make changes to
the product, technical data or assembly and operating
instructions without prior notice.
As soon as it becomes evident that safe operation is

no longer possible (e.g. visible damage), remove the
device from the grid and the photovoltaic generator
immediately.

EN
735.794 | 10.10