Maxspect R5-100 Mode D'emploi page 11

Programming Photoperiod
Time point #
LED Channel
Modify
 Press the control dial to switch between the parameters.
 Rotate the control dial to set the parameter.
 Press and hold the control dial for 3s to turn to the next
page.
Apply
 Rotate the control dial to select "Apply".
 Press the control dial to save the setting.
 Press and hold the control dial for 3s to return to the
main menu.
Preview
 Rotate the control dial to select "Preview".
 Press the control dial to runs the program in preview
mode, where the entire photoperiod is demonstrated in 3
minutes.
 Press and hold the control dial for 3s to return to the
main menu.
 Rotate the control dial to select "Modify".
 Press the control dial to readjust the parameters, see
"Modify" above.
Operating Instructions
Time
Intensity
English
9