Manual Mode; Automatic Mode; Setting The Clock - Maxspect R5-100 Mode D'emploi

Manual Mode

 Press the control dial to enter the setting.
 Press the control dial again to switch between the
channels.
 Rotate the control dial to set the brightness for each LED
channel.
 Press and hold the control dial for 3s to save the setting
and exit the page.

Automatic Mode

 Press the control dial to enter the setting.
 Rotate the control dial to switch between the settings.
 Press and hold the control dial for 3s to save the setting
and exit the page.
Within Automatic Mode, there are 3 settings for user to select :
System Clock: A clock set to be matched with users' local time.
Program: Program the photoperiod to set specific brightness for each LED channel during
different time of the day.
Preset: 4 preset settings are available for user to choose from. (Refer to p.16)
P1: SPS dominated tank.
P3: Soft Coral/LPS mixed tank.

Setting the clock

 Press the control dial to enter the setting page and then
select "System Clock".
 Press the control dial to switch between hour and minute.
 Rotate the control dial to set the time.
 Press and hold the control dial for 3s to save the setting
and exit the page.
Operating Instructions
P2: SPS/LPS mixed tank.
P4: SPS dominated tank with a different
dawn/dusk time with moon light.
English
7