Changing Temperature Unit Of Measure - Ovention Double MiLO Manuel D'installation Et D'utilisation

English
4. Touch the desired setpoint to edit. The "Edit Setpoint"
screen will appear.
Edit Setpoint Data screen.
Edit Setpoint Screen
• Touch NAME to edit the setpoint name using the keypad
that appears, then touch ENTER. The Edit Setpoint
screen reappears.
• Touch SETPOINT to edit the setpoint temperature using
the keypad that appears, then touch ENTER. The Edit
Setpoint screen reappears.
• When finished editing the setpoint, touch the "up" arrow
to return to the Edit Setpoint Data screen.
5. Repeat step 4 to edit another setpoint name/temperature.
6. When the setpoint temperature changes are complete,
touch EXIT AND SAVE to return to the Admin Mode
screen.
• If programming is complete, touch BACK to return to the
Main Recipes screen.
Form No. OVMILOM-0817
Touch to return to

Changing Temperature Unit of Measure

Use the following procedure to change the temperature unit
of measure between Fahrenheit and Celsius. This procedure
requires access to password-protected screens and should be
performed by authorized personnel only.
1. From the Main Recipes screen, touch the "up" arrow.
• A password keypad will appear on the touchscreen.
2. Input the password using the keypad, and touch ENTER.
• The Admin Mode screen will appear on the touchscreen.
3. Touch MAINT to access the Maintenance Mode screen.
Touch to access
Sound Settings
screen.
Touch to access
Diagnostics Mode
screen.
Maintenance Mode Screen
4. Touch CONFIG on the Maintenance Mode screen. The
Oven Configuration screen appears.
5. Touch TEMP MODE on the Oven Configuration screen
to toggle the unit of measure between Fahrenheit and
Celsius.
Touch to toggle between
Fahrenheit and Celcius.
OVEN CONFIGURATION
Oven Type: MILO 16"
Maximum Oven Temp: 600° F
Thermocouple offsets: 0° F
Serial Number: 1234561705
Config Version:
Oven Configuration Screen
6. When finished changing the unit of measure, touch the
"up" arrow to return to the Maintenance Mode screen.
13
OPERATION
Touch to access
Set Time/Date
screen.
Touch to access
Oven Configuration
screen.
Touch to return to
Admin Mode screen.
Temp
Passcode
Mode:
XXXXX
F
Touch to return to
Maintenance Mode screen.