Technical Information; General Description; General Characteristics - Visam SPV Série Manuel D'installation Et D'entretien

CAUTION!
Indicates danger due to the presence of suspended loads.
SPECIALIZED PERSONNEL!
Indicates the necessity of specialized personnel, duly trained in health and safety
matters according to the relevant regulations in force in the country where the
product is being installed and/or the machine is subsequently put into operation,
in particular when it has to work in places with potentially explosive atmospheres.
This symbol also indicates that said personnel are authorized to perform the
following tasks:
- installation and adjustment
- machine start-up
- ordinary and extraordinary maintenance
- technical interventions in general
2

TECHNICAL INFORMATION

2.1

General description

The Vibrator is composed of an asynchronous electric motor (3 - phase or single – phase) with
external feeding box for electrical connection through the terminal block, with relative protective
cover and a rotating shaft that stretches out from both sides, and on which one or more eccentric
weights - each provided with a protective cover - is installed (Fig. 02-01).
• A: identification plate
• B: wound stator
• C: main frame with basement
• D: bearing house
• E: rotor shaft
• F: eccentric weight
2.2

General characteristics

• electrical insulation class:
• mechanical protection grade:
• shock protection grade:
• temperature inside probe data:
• external treatment:
REV.0 | 09/2015
SPV - SPX
MANDATORY IPD!
Indicates that the specialized personnel
must use Individual Protection Devices
(IPD).
• G: terminal box cover
• H: weights cover
• K: bearing
• L: terminal block
• M: lifting eylets
• N: feeding cable gland
F + Tropicalization
IP 66
IK 10
PTC 130 °C three contact thermistor (std
from SZ. 10 upwards)
epoxy powder coating
P. 22