General Information; Validity Of The Manual; Use Of The Manual; Symbols Used In The Manual - Visam SPV Série Manuel D'installation Et D'entretien

1

GENERAL INFORMATION

WARNING
The personnel involved with the product must be acquainted with the instructions contained in
this manual, besides the safety requirements under the current national regulations. Failure to
comply with said instructions shall void all the applicable warranties and, in this respect, Visam
s.r.l. disclaim any liability for injuries or damage resulting thereof.
The instructions contained in this manual provide a detailed description of the machine parts and
their correct handling and operation, with the aim of ensuring safe and proper compliance with
the instructions as per transport, handling, installation, operation, maintenance, disassembly and
disposal, related to machine conditions at the moment of shipping by Visam s.r.l..
In any case, the user of the machine on which the product is to be installed, shall be held responsible
before the competent authorities for the compliance of said machine with regards to the statutory
safety requirements.
1.1

Validity of the manual

The instructions contained in this manual apply to the following series of Vibrators: SPV - SPX.
WARNING
The personnel involved with the product must verify, first of all, whether this documentation
applies to the model at issue. In case of doubt and/or difficulty or special applications for which
additional information is required, contact Visam s.r.l. Technical Customer Service Department.
1.2

Use of the manual

This manual must be kept within easy reach of the operator, near the machine on which the product
is installed and made available at all times to the authorized personnel; Visam s.r.l. hereby disclaims
any liability arising from manipulation or changes made to the content of this manual by third parties.
This manual must be properly kept for future reference until the machine is scrapped. In case of
transfer of the machine, this manual must be consigned to the new owner. In case of loss and/
or whenever needed, a copy of this documentation can be requested from Visam s.r.l. Technical
Customer Service Department.
1.3

Symbols used in the manual

Below is a description of the symbols used in this manual:
CAUTION!
Safety warning indicating hazardous conditions that may arise during technical
interventions.
CAUTION!
Indicates the possible danger of electrocution due to the presence of voltage.
CAUTION!
Indicates danger due to the presence of moving parts.
SPV - SPX
P. 21
REV.0 | 09/2015