TFA LIFE 35.1153 Mode D'emploi page 9

Station météo radio-pilotée
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
TFA_No. 35.1153_Anleitung
07.05.2019
LIFE – Wireless weather station
6.2 Outdoor values reception
• The base station automatically starts scanning the signals to register the outdoor transmitter at channel 1 after batteries
are inserted. The reception symbol flashes. If the reception of the outdoor values fails, "- -" appears on the base station
display. Check the batteries and try it again. Check if there is any source of interference.
• You can also start the initialization manually. Choose CH1 by pressing the CH/▲ button. Press and hold the CH/▲ button
for 3 seconds. The reception symbol flashes.
7. Operation
7.1 Manual setting of the clock and calendar
• Press and hold the SET button in normal mode. The year indication will be flashing and you can adjust the year with the ▲
or ▼ button.
• Press the SET button again and the setting sequence is shown as follows: Month, day, the 24 or 12 hours display (default:
24 Hr), hours and minutes and adjust with the ▲ or ▼ button.
• Confirm with the SET button.
• Press and hold the ▲ or ▼ button in setting mode for fast mode.
• The device will automatically quit the setting mode if no button is pressed for 8 seconds.
7.2. 12 and 24 hours display
• Press the ▲ or ▼ button in setting mode to choose the 12 HR or 24 HR system.
• In 12 HR system AM or PM appears on the display.
8. Thermometer and hygrometer
8.1 Display change °C/°F
• Press the SET button in normal mode to select the temperature display in °C (Celsius) or °F (Fahrenheit) as the tempera-
ture unit.
8.2 Maximum/Minimum function
• Press MEM/▼ button to show the maximum (MAX) values of indoor and outdoor temperature and humidity. Press MEM/▼
button again to show minimum (MIN) values.
16
18:32 Uhr
Seite 9
LIFE – Wireless weather station
• Press the MEM/▼ button again and you will return to normal mode.
• If you press and hold the MEM/▼ button for 3 seconds, the values are deleted and reset to the actual value.
9. Weather forecast symbols
• The weather station has four different weather symbols (sunny, slightly cloudy, cloudy, rainy).
• The weather symbol is based on the changes of humidity values.
10. Backlight
• Press the LIGHT button to activate the backlight briefly.
11. Additional outdoor transmitters (optional) Cat.-No. 30.3241.02
• When having more than one external transmitter, select a different channel for each one with the CH 1/2/3 switch inside the
transmitter's battery compartment. Insert two new AA 1,5 V batteries, polarity as illustrated. Start the base station opera-
tion or the manual search for the outdoor transmitter.
• Choose the respective transmitter by pressing the CH/▲ button.
• Press and hold the CH/▲ button for 3 seconds. The last registered transmitter (channel) will be canceled and the transmit-
ter search begins.
• The outdoor values and the channel number will be shown on the base station display. If you have installed more than one
outdoor transmitter, press the CH/▲ button on the base station to change between the channels 1 to 3.
• With the MEM/▼ button you can recall the highest and lowest temperature and humidity values for all installed transmitters.
12. Positioning and mounting of the base station and the transmitter
• The base station can be placed onto any flat surface (foldout stand) or wall mounted (mounting hole) at your chosen loca-
tion. Make sure to avoid the vicinity of any source of interference such as computer screens, TV sets or solid metal objects.
• The outdoor transmitter can be placed onto any flat surface or wall mounted at a chosen location by the mounting hole
found at the back of the unit. When placed outdoors, choose a shady and dry place for the transmitter. Direct sunlight may
trigger incorrect measurement and continuous humidity damages the electronic components needlessly.
• Once the desired location is chosen, check whether the transmission from the device to the base station is possible (trans-
mission range of up to 60 m in open areas). Within solid walls, especially ones with metal parts, the transmission range
can be reduced considerably.
• If necessary choose another position for the outdoor transmitter and/or receiver.
17

Publicité

Table des Matières
loading

Table des Matières