Setup 3: Connect The Power Cord - Sony SDM-P232W Mode D'emploi

2 Using the supplied HD15-HD15 video signal cable
(analog RGB), connect the computer to the
monitor's HD15 input connector (analog RGB) for
INPUT1 or INPUT2.
Connect the computer according to the following
illustrations.
x Connecting to an IBM PC/AT or
compatible computer
to the HD15 input
connector (analog RGB)
for INPUT1 or INPUT2
to the computer's HD15 output
connector (analog RGB)
IBM PC/AT or
compatible computer
x Connecting to a Macintosh
to the computer's
output connector
Macintosh
When connecting a Macintosh computer, use an adapter (not supplied),
if necessary. Connect the adapter to the computer before connecting the
video signal cable.
8
HD15-HD15 video signal
cable (analog RGB)
(supplied)
to the HD15 input
connector (analog RGB)
for INPUT1 or INPUT2
HD15-HD15 video
signal cable (analog
RGB) (supplied)

Setup 3: Connect the power cord

1 Connect the supplied power cord to the monitor's
AC IN connector.
2 Connect it to a power outlet.
1
to AC IN
to power outlet
power cord (supplied)
2