Waste Disposal; Bartscher Gmbh Franz-Kleine-Str - Bartscher Contessa 1002 Mode D'emploi

PROBLEM
The unit is turned on, the
brewing indicator does
not come on and hot
water does not flow out.
When turned on a fuse
immediately burns out.
The above described problem cases are given for orientation and as examples.
Should these or similar problems occur, please turn off the machine immediately
and don´t use it anymore. In order to check and repair your machine, please
contact a qualified expert or the manufacturer immediately.

8. Waste disposal

Discarding old devices
At the end of its service life the discarded device has to be disposed in accordance with
the national regulations. It is advisable to contact a company which is specialized in
waste disposal, or just contact the local disposal service in your community.
WARNING!
To exclude any abuse and the dangers involved make the waste device unfit for
use before disposal. For that purpose disconnect device from mains supply and
remove mains connection cable from the device.
NOTE!
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
- 32 -
CAUSE
•
Control panel is
damaged
•
Damaged filling switch
•
Short-circuit
For the disposal of the device please consider and
act according to the national and local rules and
regulations.
REMEDY
•
Contact supplier
•
Contact supplier
•
Contact supplier
phone: +49 (0) 5258 971-0
fax: +49 (0) 5258 971-120