Brewing Coffee - Bartscher Contessa 1002 Mode D'emploi

Brewing coffee

1. Remove the filter basket and place the appropriate Bartscher filter (article no. 190.013
or 190.002-250).
2. Pour the desired amount of coffee into the paper filter (approx. 6 g per cup).
3. Insert the filter basket into the guides and push until it locks into place.
4. Pour the appropriate amount of
cold fresh drinking water into the
water container, max. 2.0 litres.
The minimum amount necessary to
pour is 0,5 litres.
CAUTION!
Fill the water container with only
fresh drinking water.
Never pour sugar, coffee, tea or milk
into the water container!
5. Place the thermo jug on the bottom plate so that its opening is located under the
opening in the filter basket.
6. Turn the coffee machine on using the power switch. The control light will come on.
7. After a short time, hot coffee will begin to pour into the thermo jug.
NOTE!
While coffee is being made, the sound of boiling water flowing through the device
can be heard. A small amount of steam will escape during this process.
8. After the brewing process is finished the coffee machine will automatically turn off,
and the red control light will go off.
Coffee is ready to be served.
- 27 -