Waste Disposal; Bartscher Gmbh Franz-Kleine-Str; D-33154 Salzkotten Germany - Bartscher PRO 40T Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

The machine shuts off.
The device is turned on,
the red control lght is
on, but boiling water is
not flowing out.
Fuse blows immediately
when the machine is
turned on.

8. Waste disposal

Discarding old devices
At the end of its service life the discarded device has to be disposed in accordance with the
national regulations. It is advisable to contact a company which is specialized in waste disposal, or
just contact the local disposal service in your community.
WARNING!
To exclude any abuse and the dangers involved make the waste device unfit for use before
disposal. For that purpose disconnect device from mains supply and remove mains
connection cable from the device.
NOTE!
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Overheating protection
was triggered.
Main heater is defect
Thermostat is defect
Short circuit
For the disposal of the device please consider and act according
to the national and local rules and regulations.
Let the device cool down first.
Remove socket and press
RESET button underneath
the device. Decalcify the
device.
Contact retailer
Contact retailer
Contact retailer
phone: +49 (0) 5258 971-0
fax:
+49 (0) 5258 971-120
- 27 -

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pro 60tPro 100tA190.141A190.161A190.191

Table des Matières