Automatic Operation; Sound-To-Light Mode; Inversion Of The Rotating Movement; Inversion Of The Swivel Movement - Renkforce Superbeam Notice D'emploi

c) Automatic Operation
• In the menu, select Work Mod and push the ENTER button.
• Select the operating mode Auto with the arrows.
• Press the ENTER button to confirm your selection.
The device performs an automatically controlled light show in this operating mode.
d) Sound-to-light mode
• In the menu, select Work Mod and push the ENTER button.
• Select the operating mode Sound with the arrows.
• Press the ENTER button to confirm your selection.
• Choose the menu item Soud Sen with the arrows and push the button ENTER.
• Set the microphone sensitivity with the arrows and confirm your input with the button ENTER.
The device is controlled via the installed microphone in time with the music in this mode.
Set the microphone sensitivity so that the light effect changes in time with the music.
In Sound-to-Light mode, the LED SOUND next to the display will flash.
e) Inversion of the rotating movement
• In the menu, select Pan Inve and push the ENTER button.
• Select the desired option with the arrows:
No Normal rotating direction
Yes Inverted rotating direction
• Press the ENTER button to confirm your selection.
f) Inversion of the swivel movement
• In the menu, select Tilt Inv and push the ENTER button.
• Select the desired option with the arrows:
No Normal swivel direction
Yes Inverted swivel direction
• Press the ENTER button to confirm your selection.
32