Aerocrine NIOX MINO Manuel De L'utilisateur page 7

19. Input the passcode 0000
using the number buttons
to confirm that a new
NO scrubber is installed
20. Select OK to accept the
changes
21. Optional: Activate
Bluetooth for wireless
communication with PC or
connect a USB cable, see
page 19
22. Select Return to go back to
the Main screen
23. Allow the instrument to
stabilize.
Note!
Stabilization of the instrument normally may
take up to 30 minutes following connection
of the power supply unit to the power outlet.
However, it is recommended to allow a new
NIOX MINO Sensor to be connected for two
®
hours before the first measurement is done.
E N G L I S H
5