Remaining Hazards; Machine Specifications; Machine Description; Technical Data - Jet JWBS-16X Mode D'emploi

3.3 Remaining hazards

When using the machine according to regulations some
remaining hazards may still exist
The moving sawblade in the work area can cause injury.
Broken saw blades can cause injuries.
Thrown workpieces can lead to injury
Wood chips and sawdust can be health hazards. Be sure to
wear personal protection gear such as safety goggles ear-
and dust protection.
Use a suitable dust exhaust system.
The use of incorrect mains supply or a damaged power cord
can lead to injuries caused by electricity.

4. Machine specifications

4.1 Machine Description

A Height scale
B Blade tracking window
C Height adjust hand wheel
D Upper blade guides
E Saw blade
F Parallel cutting device
G Table pin
H Dust port
I Wheel cover
J Mitre gauge
K Fence carrier
L Fence
M On/Off magnetic switch
N Blade tension handwheel
O Wheel cover
P Wheel cover micro switch
Fig 1

4.2 Technical data

JWBS-16X:
Wheel diameter
Cutting width
Cutting height
Sawblade length
Blade width
Blade thickness
Cutting speed
Machine Table(Lx W)
Table tilting range
Working height
Dust port diameter
Overall (LxWxH)
Weight
Mains
Motor output power
Reference current
Extension cord (H07RN-F):
Installation fuse protection
Mains
Motor output power
Reference current
Extension cord (H07RN-F):
Installation fuse protection
JWBS-18Q:
Wheel diameter
Cutting width
Cutting height
Sawblade length
Blade width
Blade thickness
Cutting speed
Machine Table(Lx W)
Table tilting range
Working height
Dust port diameter
Overall (LxWxH)
Weight
Mains
Motor output power
Reference current
Extension cord (H07RN-F):
Installation fuse protection
Mains
Motor output power
Reference current
Extension cord (H07RN-F):
Installation fuse protection
JWBS-20Q:
Wheel diameter
Cutting width
Cutting height
Sawblade length
Blade width
Blade thickness
Cutting speed
420 mm
max 405 mm
max 250 mm
3125 mm
3 - 25 mm
0,5 – 0,7 mm
900 m/min
430x430 mm
-10° to 45°
890mm
100mm
800x950x1850mm
155 kg
230V ~1/N/PE 50Hz
1,1 kW (1,5HP) S1
7 A
3x1,5mm²
16A
400V ~3L/PE 50Hz
1.5 kW (2 HP) S1
3,5 A
5x1,5mm²
16A
470 mm
max 460 mm
max 300 mm
3480 mm
3 - 30 mm
0,5 – 0,7 mm
550 / 970 m/min
485x485 mm
-10° to 45°
950mm
100mm
850x1000x1900mm
180 kg
230V ~1/N/PE 50Hz
1,5 kW (2HP) S1
9,5 A
3x1,5mm²
16A
400V ~3/PE 50Hz
2,2 kW (3 HP) S1
5 A
5x1,5mm²
16A
520 mm
max 508 mm
max 300 mm
3820 mm
3 - 30 mm
0,6 – 0,8 mm
550 / 970 m/min