Télécharger Imprimer la page

Siebert S202 Série Manuel D'utilisation page 25

Masquer les pouces Voir aussi pour S202 Série:

Publicité

Les langues disponibles

Les langues disponibles

Monitor display
The monitor display in normal mode corresponds to the main display. It allows
reading the display values on the back of the units. In menu mode the display
represents a menu for the unit parameterization (see 'Parameterization').
Control
The units must be parameterized before controlling is possible. The parameterization
is done in a menu (see 'Parameterization').
In the following, the numbers in [ ] refer to the corresponding line in the following
function table.
Parallel control in the BCD code
In menu item 1 setting 1 is to be selected. The BCD data of all digits is applied to the
inputs D19...D0 and transferred with a pulse on input DS in the display [1...4]. The
rising edge of the pulse causes the data to be transferred.
If setting 2 is selected in menu item 1, input DS is without function. The display
instantly corresponds with the data on the inputs D19...D0.
Parallel control in the binary code
In menu item 1 setting 3 is to be selected. The binary coded data is applied to the
inputs D16...D0 and transferred with a pulse on the DS input in the display [5]. The
rising edge of the pulse causes the data to be transferred.
If setting 4 is selected in menu item 1, input DS is without function. The display
instantly corresponds with the data on the inputs D16...D0.
If the binary value applied to the data inputs is larger than representable in the
display, o (overflow) appears in the display.
BAL S202 PAR M 1.0
25

Publicité

loading