LGB JONNY Instructions De Service page 5

USA GB
22910
Field Railroad Diesel Loco,
JONNY ®
THE PROTOTYPE
Around the world, light-duty railways
transport goods at factories, farms,
mines and construction sites. These
"field" railways gained popularity in
the late 1800s, and today, these little
railways are still employed for big
jobs, like the building of the Channel
Tunnel. Historic field railways survive
in museums and parks.
THE MODEL
This detailed replica features:
- weather-resistant construction
- factory-installed decoder for MTS
and analog operation
- protected gearbox with Bühler
motor
- four powered wheels
- six power pickups
- length: 185 mm (7.3 in)
- weight: 1370 g (3.0 lb)
THE PROGRAM
With this model, we recommend the
following items:
- 30170 Field Railroad Passenger
Car
- 31170 FRR Passenger Car
- 40170 Field Railroad High-Side
Gondola, Brown
- 40190 Field Railroad Bulk Goods
Cars, Green, 2 pieces
- 40200 Field Railroad Caboose
- 40510 Field Railroad Forklift Car
- 42430 Field Railroad Tipple Car,
Red
10
- 43170 Field Railroad Cable Reel
Cars, 2 pieces
- 45150 Field Railroad Baggage Car
For information on the complete LGB
program, see the LGB catalog.
OPERATION
Attention! This locomotive
equipped with a toothed drive belt.
To protect the drive mechanism, do
not push the locomotive by hand.
Attention: Do not connect this model
to other loco models with different
starting characteristics. This can
damage the internal gearing.
Couplers
The buffers at the front and at the
rear of the model work like standard
LGB couplers. The hook of the car
will engage into the buffer. (If neces-
sary, turn the car around so the hook
faces the loco.) To equip your cars
with hooks on each end, use the
64402 Coupler Hook. You also can
replace the buffers on the loco with
standard coupler loops. These are
available at the LGB Service Stations
(No. 1.20140.200.1; two pieces nec-
essary) (see Authorized Service).
Multi-Train System
The model is equipped with a facto-
ry-installed 55022 MTS decoder for
the LGB Multi-Train System. It can be
used without modifications on ana-
log or digital layouts. For operation
with the Multi-Train System, the
model is programmed to loco
address 03. For information on pro-
gramming the loco address, see the
instructions for various MTS compo-
nents.
When operating with the Multi-Train
System, the loco features a "Back-
EMF" function. This keeps the motor
speed constant (and under normal
conditions the loco speed), even
when the load of the loco changes,
for example, in curves or on grades.
This feature does not work at top
speed, because additional voltage
must be available to overcome any
added load.
If desired, numerous functions of the
is
55022 decoder, such as acceleration,
braking, direction of travel and many
others, can be programmed using a
PC and the 55045 MTS PC Decoder
Programming Module (see Instruc-
tions for advanced users). These
functions also can be programmed
from the 55015 Universal Remote.
Power Supply
Attention! For safety and reliability,
operate this model with LGB power
supplies (transformers, power packs
and controls) only. The use of non-
LGB power supplies will void your
warranty.
Use this model with LGB power sup-
plies with an output of at least 1
amp. For more information on LGB
power supplies for indoor, outdoor
and multi-train operation, see the
LGB catalog.
Attention! After extended operation,
this model may leave carbon dust or
other debris around the track. This
dust and debris can stain carpet and
other materials. Consider this when
setting up your layout. Ernst Paul
Lehmann Patentwerk and LGB of
America are not liable for any damages.
SERVICE
Do-It-Yourself Service Levels
Level - Beginner
Level - Intermediate
Level - Advanced
Attention! Improper service will void
your warranty. For quality service,
contact your authorized retailer or an
LGB factory service station (see
Authorized Service).
Hint: Additional expert instructions
for many LGB products are available
at www.lgb.com.
Lubrication
The axle bearings and the side rod
ends should be lubricated occasion-
ally with a small amount of LGB
Maintenance Oil (50019).
Cleaning
This model can be cleaned externally
using a mild detergent and gentle
stream of water. Do not immerse this
model.
Maintenance parts
50010 Smoke and Cleaning Fluid
50019 Maintenance Oil
51020 Gear Lubricant
62209 20140-Series Motor
63120 Brushes, Assembled,
14 mm and 16 mm,8 pieces
63218 Standard Pick-Up Shoes,
2 pieces
INSTRUCTIONS FOR ADVANCED
USERS
55022 MTS Decoder
Programming functions
You can program numerous func-
tions of the 55022 decoder to suit
your requirements. If you want to do
this, program the "function values"
in "registers" (CVs) using a PC and
the 55045 MTS PC Decoder Pro-
gramming Module. You can also pro-
gram the function values using a
55015 Universal Remote.
11