Toto Soirée TB6FS Manuel D'installation Et D'utilisation page 6

Robinet de baignoire à monter
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installing the Diverter
1. Disassemble locknut and
T-connector from diverter
valve.
2. Insert valve into hole from
above.
3. Secure the diverter valve by
tightening the locknut.
4. Reassemble T-connector onto
valve.
Installing the Handshower
1. Disassemble locknut from
handshower unit.
2. Insert handshower unit into
hole from above.
3. Secure the handshower unit
by tightening the locknut.
Installing the Flex Hoses
1. Connect flex hoses as shown
in diagram.
2. Leave diverter plug in place
while conducting leak testing.
Ensure all the linkages are
working properly, adjust
if needed.
3. Consult the troubleshooting
section on next page to resolve
any issues. When installation
is complete, finish the deck
before installing trim according
to the instructions in its
installation manual.
InSTaLLaTIon PRoCeDURe
6
TS960S
Locknut
T-Connector
Handshower unit
Locknut
Flex hose
TS960S1
Rough Deck
Diverter Valve
Rough deck
Flex hose

Publicité

Table des Matières
loading

Table des Matières