General Information; Safety Information - Hach A1000 Manuel D'utilisation De Base

Specification A1000
Inputs/Outputs (communications)
Serial RS232, three connectors (Data Acquisition, Printer
Diagnostics)
RS485, reserved for the local BNC cable for the
analyzer
Analog 4–20 mA, opto-isolated
12 VDC, non-isolated at 0.5 A (maximum)
Digital Two digital inputs, maximum input 5–30 VDC and
1–10 mA, opto-isolated
Two digital outputs that supply 5–30 VDC, opto-isolated
Bias 12 VDC, 0.5 A
Network protocol RS485
Maximum analyzers 8 per C80 controller
Maximum 8
C80 controllers (any
configuration)
Network cabling Shielded twin-axial, twist-lock BNC
Safety rating Certified to UL and CSA safety standards by CSA.
Marked with cCSAus and CE.
Thermal printer
Specification Details
Method Thermal, serial, dot-matrix
Format 9 dots high x 7 dots wide
Speed 52.5 characters per second (cps)
Width 89.6 mm
4
A1000 S20P model only
A1000XP Specification
Paper size
3
and Buffer
Temperature range
Humidity
Power (via wall transformer)
NiCad
Maximum power consumption Negligible
Dimensions (W x D x H)
Interface

General information

In no event will the manufacturer be liable for direct, indirect, special,
incidental or consequential damages resulting from any defect or
omission in this manual. The manufacturer reserves the right to make
changes in this manual and the products it describes at any time, without
notice or obligation. Revised editions are found on the manufacturer's
website.

Safety information

The manufacturer is not responsible for any damages due to misapplication or
misuse of this product including, without limitation, direct, incidental and
consequential damages, and disclaims such damages to the full extent permitted
under applicable law. The user is solely responsible to identify critical application
risks and install appropriate mechanisms to protect processes during a possible
equipment malfunction.
Please read this entire manual before unpacking, setting up or operating
this equipment. Pay attention to all danger and caution statements.
Details
112 mm, 40-column
7400 characters
0 to 40 °C (32 to 104 °F)
30 to 80% relative humidity, non-condensing
120 VAC, 60 Hz standard (230 VAC, 50 Hz
optional)
4
4.8 VDC, 1.5 A
160 x 66.5 x 170 mm (6.3 x 2.6 x 6.7 in.)
RS232 serial, 1200 baud
N O T I C E
English 5