Cleanmaxx SG-5509S-8 Mode D'emploi page 25

4. For dry-ironing move the steam quantity control (13) to position 0; for steam-ironing
move it to 1 – 2 as required. NOTE: Steam-ironing is only possible from the tempera-
ture setting ••.
5. You can now start ironing. Move the bottom of the iron (8) back and forth on the fabric
until it is smooth.
6. When the water reservoir is empty, steam will no longer be produced. Follow the
instructions in the "Filling the Water Reservoir" section to top it up again.
Steam Blast / Vertical Steam-Ironing
CAUTION!
• Make sure when doing vertical ironing that there is plenty of space around the item
of clothing which is to be ironed. You may only perform vertical ironing if the item of
clothing is hanging on a hanger and cannot come into contact with other garments,
objects, people or animals.
• Iron the laundry only in places where heat and moisture cannot do any damage, e.g.
NOT in front of wallpaper, windows or mirrors.
In addition to conventional steam-ironing, the iron can also emit a strong blast of steam,
e.g. for smoothing stubborn creases or textiles which are hanging up.
1. Make sure that the water reservoir has been fi lled and the device has heated up.
Spray Function The spray function is suitable, for example, for moistening delicate
textiles which cannot be steam-ironed. This function is independent of the steam function
and is possible at any temperature.
• Make sure that the water reservoir has been fi lled. Press the
few times. Water will be sprayed through the spray nozzle (11) onto the fabric.
Note: This function is independent of the steam function and is possible at any tem-
perature.
After Use
1. Once you have fi nished ironing, move the steam quantity control to position 0 and the
temperature control to position MIN.
2. Place the device upright on the base.
3. Remove the mains plug from the plug socket.
4. Allow the bottom of the iron to cool down completely.
03333_de-en-fr-nl_V1.indb 25 03333_de-en-fr-nl_V1.indb 25
25
2. Press the button for a steam blast (15), move the bot-
tom of the iron (8) a little in front of or on the fabric and
then release the button again. NOTE: When performing
vertical steam-ironing on delicate fabrics, hold the iron a
few centimetres away from the fabric.
3. Wait a few seconds before you press the button again.
NOTE: The lower the ironing temperature, the weaker the
production of steam and the longer it takes for more steam
to be produced.
EN
spray button (14) a
23.06.2015 12:08:37 23.06.2015 12:08:37