Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5 - Programming
5.2 - Programming from keypad
On completion of operations described in section "First activation", it will be possible to access
the programming menus and execute a great number of editings that will allow you to fully use
the burglar-alarm unit features and therefore meet the user's needs.
Two programming levels are required:
•
level 1
to the Maintenance and Command menus. It allows access, though with partial use, to the
Automation menus (enabling and disabling) and Alarms memory (deleting is not allowed), can
also rename and enable the scenarios and keys and update the numeric codes.
The user can access the level only:
From the keypad
Press OK then type the user code (based 00000).
Entering an incorrect code three times in succession the Control unit prevents the enabling
of other codes for 1 minute.
114
(user), allows access to the functions used to operate the Unit. It does not allow access
–– –– –– –– –– –– ––
17 / 11 / 08
Key/Code
*
1
2
4
5
7
8
0
08 : 13
3
6
9
Publicité
Chapitres
Table des Matières
