Settings - LEGRAND 675 20 Notice D'installation

6 - Burglar-alarm menu
Scenarios

6.7 - Settings

The user can edit all options in this menu without jeopardizing the proper functioning of the
system.
Use the vertical scroll keys
User code
Codes/key
Contrast
Sound signalling
124
Zones Devices
Event memory
to select one of the following required functions:
- this function can modify the user code. In the factory setting the user and
maintenance codes coincide and are both: 00000. In this case one always
has access to all the programming menus; modifying this setting the user
code will not allow access to the menus reserved to the installer.
- gives the list of transponder keys and numeric codes. Use can be enabled
or disabled for each of these; the codes can be customised.
- display contrast adjustment.
- if there are delayed devices in the system an audible signal can be
enabled from the control unit and from all the connectors for the time set
for the delay.
Date and hour Automations
User code
Codes/keys
Contrast
Select
Maintenance