Appendix - LEGRAND 675 20 Notice D'installation

Appendix

Technical data
Power supply
Absorption
Operating temperature
Telephone line
Dimension
Connection to line
Selection system
Degree of protection
Teleph. numbers that can be stored
Telephone command number
OPEN–SCS interface
The Burglar Alarm 675 20 is totally programmable from a PC with SecurityConfig software; this
application lets you:
• Update the Unit firmware.
• Personalise all vocal messages.
• Program all parameters.
Standard references
The Item in this manual is provided with the CE Conformity Declaration according to the
requirements shown below:
Legrand declares that the product, Item:
is in compliance with the essential requirements of the 2006/5/CE directive, as it complies with
the following standards:
EN60950 EN50081-1 EN50082-1 EN50130-4 EN50130-5
CE mark year, according to the specified directive: 2008
More information concerning reference standards can be found at:
from SCS bus: 18 – 28 V
Stand–by: 55 – 90 mA Max
5 – 40 °C
DTMF/PULSES
L= 125 mm; H= 128 mm; P= 31 mm
Double wire with telephone pair
Only with selection in DTMF multifrequency
IP 30
Jolly number +10
9 with the simplified commands
for WHO = 0, 1, 2, 4, 5, 9
675 20
ETSI TBR21 ETSI ES 201187 V1.1.1
www.legrandelectric.com
163