Automations - LEGRAND 675 20 Notice D'installation

6 - Burglar-alarm menu
Scenarios

6.6 - Automations

When you access this menu with the Maintenance Code, a list of 20 automations, which can be set
up, is displayed. The automation lets you link an execution to one specific burglar-alarm event.
For example, it is possible to program the Unit in such a way that, in case of a burglar alarm, it can
send a command to turn ON the lights, hence confusing the trespasser.
NOTE: In this case, the Open code can be only of the Lighting or Automation type and of the
*
point-point type (not applicable to general commands or group commands).
A few automation examples:
Intrusion alarm: lights turn ON in room 3 at every trespassing alarm.
Date and hour: burglar alarm disconnection at 7.00 every day (e.g. string: **/**/** 07:00).
It does not comply with level 2 of CEI 79-2 standard.
OPEN code: links two executions, for example the lights go out in a room while roller shutters
roll up in the same room.
Key: a key can be programmed so that when it is used for switching ON/OFF, it corresponds for
example to switching a light ON or OFF.
122
Zones Devices
EVENTS THAT CAN BE LINKED TO AN AUTOMATION
AUTOMATIONS
Date and hour
Event memory
alarms
technical
plant failure
insertion
deconnection
date and hour
OPEN code
Settings Maintenance
intrusion
24 hours
antipanic
silent
end alarm
aux channel 1
aux channel ...
aux channel 9
supply lack
dead battery
supply return
partialis.
connector
key
partialis.
connector
key
select
select *