Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8 - Operation
8.4 - Consulting the event memory in case of an alarm
When the display appears like the figure below, it indicates that an alarm has occurred since the
last activation of the burglar alarm. It is possible to know what type of alarm occurred and which
sensor has detected it by pressing the
1 2 3 4
144
–– –– –– ––
IR sensor 32
window
Intrusion alarm
inserted
1 2 3 4
–– –– –– ––
1
2
3
4
5
6
7
8
9
0
P
1 2 3 4
–– –– –– ––
17 / 11 / 08
keys.
1 2 3 4
–– –– –– ––
15 : 51
The signal automatically
disappears from the display
after the next activation of
the burglar alarm.
Press the
keys to display
information concerning the alarm
The display provides information on:
- sensor and alarm zone
- type of alarm (e.g. intrusion)
- system status during the alarm
(e.g. ON)
Press
to go back to the initial page
The signal "alarms present" is
automatically eliminated after the
next activation of the burglar alarm;
the technical alarms can be cancelled
either from the alarms memory or
locally by resetting the device that
has picked them up
All alarms and other events
concerning the burglar alarm are
recorded in a special memory that
can be consulted by the installer
through the procedure described in
par. 6.4
Publicité
Chapitres
Table des Matières
