Technical Specifications; Am10 - Bose ArenaMatch DeltaQ Guide D'installation

Masquer les pouces Voir aussi pour ArenaMatch DeltaQ:
Table des Matières

Publicité

PRO.BOSE.COM

Technical Specifications

AM10

Single Module Performance
Frequency Response (–3 dB)
1
Frequency Range (–10 dB)
Nominal Coverage Pattern (H × V)
Recommended High-pass Filter
Crossover
70V/100V transformer tap settings
Power Handling, long-term continuous
Power Handling, peak
Sensitivity (SPL / 1 W @ 1 m)
5
Calculated max. SPL @ 1 m (Bose power test)
Calculated max. SPL @ 1 m (2-hour power test)
Calculated max. SPL @ 1 m (Bose power test), peak
Calculated max. SPL @ 1 m (2-hour power test), peak
EN 54-24 Certified Ratings
7
Sensitivity (1 W @ 4 m)
Measured max. SPL @ 4 m
Coverage Angle Octave Band (Hz)
Horizontal Coverage
Vertical Coverage
Passive Nominal Impedance
Rated Noise Voltage /
Transformer Rated Noise Power
Transducers
Low Frequency
High Frequency
Nominal Impedance
Physical
Enclosure Material
Finish
Grille
Environmental
8
Connectors
Suspension/Mounting
Dimensions (H × W × D)
Net Weight
Shipping Weight
Accessories
Footnotes
1.
Frequency response and range measured on-axis in anechoic environment with recommended bandpass and EQ. Frequency response graphs display SPL axis with 0 dB line
referenced to sensitivity SPL value.
2.
Impedance measurements were recorded with the 60° waveguide installed, per EN 54-24.
3.
Bose extended-lifecycle test using pink noise filtered to meet IEC268-5, 6-dB crest factor, 500-hour duration.
4.
AES standard 2-hour duration with IEC system noise.
5.
Sensitivity measured in anechoic environment with recommended bandpass and EQ.
6.
Maximum SPL calculated using sensitivity and power ratings, exclusive of power compression.
7.
The specifications data was measured in an anechoic chamber, free-field. Reference plane is on the grille surface. Reference axis is perpendicular to center of grille surface.
Horizontal plane is containing the reference axis and parallel to the horizontal axis defined by longest enclosure dimension.
8.
Tested to IP55 per EN60529 when used in General Purpose Audio installation, not for Fire and Evacuation notification applications. Notified Body certified by UL per the EN54-24
standard for an IP33C rating, acceptable for use in a Fire and Evacuation Notification System application.
Installation Guide • ArenaMatch DeltaQ Array Loudspeaker
65 Hz to 16 kHz
55 Hz to 18 kHz
60° × 10° (AM10/60) or 80° × 10° (AM10/80) or 100° × 10° (AM10/100)
60 Hz with minimum 12 dB / octave
950 Hz internal passive or external bi-amp (Bose ControlSpace presets)
2
70V: 100W (50 Ώ), 200W (25 Ώ), 400W (13 Ώ); 100V: 200W (50 Ώ), 400W (25 Ώ)
Bose Extended Lifecycle Test
LF (bi-amp)
600 W
2400 W
AM10/60
LF
HF
94 dB
107 dB
122 dB
129 dB
6
124 dB
131 dB
128 dB
135 dB
130 dB
137 dB
100V/400W
87.7 dB
112.1 dB
500
1000
137°
108°
125°
75°
8 Ώ
100V / 400W
1 × Bose LF14 neodymium 14-inch woofer (4-inch voice coil)
6 × Bose EMB2S titanium-diaphragm, neodymium compression drivers (2-inch voice coil)
Passive: 8 Ω / Bi-amp: 8 Ω + 8 Ω
Exterior-grade birch plywood
Two-part polyurea coating, black
Powder-coated perforated stainless steel, acoustic foam, stainless steel mesh
Rated for direct-exposure outdoor installations (IP55 per EN60529; IP33C per EN54-24)
Barrier strips: passive in/through, bi-amp, and 70V/100V, with cover
8 × M12 non-stainless steel threaded inserts (4 per side); 2 × M10 stainless steel threaded inserts (1 per side); 2 × M6 stainless
steel threaded inserts (1 per side); 1 × M10 stainless steel threaded insert, rear safety connection
409 × 783 × 420 mm (16.1 × 30.8 × 16.5 in)
36.3 kg (80 lb)
43.5 kg (96 lb)
U-bracket, array suspension kits, waveguide kits
3
HF (bi-amp)
Low-Z Passive
150 W
750 W
600 W
3000 W
Low-Z Passive
LF
100 dB
94 dB
106 dB
129 dB
122 dB
127 dB
131 dB
124 dB
130 dB
135 dB
128 dB
134 dB
137 dB
130 dB
136 dB
Low-Z Passive
100V/400W
87.7 dB
86.8 dB
115.3 dB
111.8 dB
2000
4000
500
1000
75°
54°
136°
98°
30°
19°
123°
69°
Technical Specifications
AES Transducer Test
LF (bi-amp)
HF (bi-amp)
1000 W
250 W
4000 W
1000 W
AM10/80
HF
Low-Z Passive
LF
99 dB
94 dB
128 dB
122 dB
130 dB
124 dB
134 dB
128 dB
136 dB
130 dB
Low-Z Passive
100V/400W
86.8 dB
86.0 dB
114.4 dB
111.0 dB
2000
4000
500
82°
78°
140°
29°
17°
125°
4
Low-Z Passive
1250 W
5000 W
AM10/100
HF
Low-Z Passive
105 dB
98 dB
127 dB
127 dB
129 dB
129 dB
133 dB
133 dB
135 dB
135 dB
Low-Z Passive
86.0 dB
113.7 dB
1000
2000
4000
93°
94°
96°
72°
31°
17°
English • 19

Publicité

Table des Matières
loading

Table des Matières