Check that the throttle trigger and throttle
lockoutmove freely and that the return springs work
properly.
See instructions under the heading Start. Start the
hedge trimmer and apply full throttle. Release the
throttle trigger and check that the blades stop and
remain stationary. If the blades move when the
throttle trigger is in the idle position then the
carburettor idle setting must be adjusted. See
instructions under the heading Maintenance.
Stop switch
Use the stop switch to switch off the engine.
Start the engine and make sure the engine stops
when you move the stop switch to the stop setting.
The stop switch automatically returns to the start
position. In order to prevent unintentional starting,
the spark plug cap must be removed from the spark
plug when assembling, checking and/or performing
maintenance.
Hand guard
The hand guard prevents hands from coming into
contact with the moving blades, for example, if the
operator loses grip on the front handle.
Check that the hand guard is fitted correctly.
Check that the hand guard is undamaged.
Vibration damping system
Your machine is equipped with a vibration damping
system that is designed to minimize vibration and
make operation easier.
The machine's vibration damping system reduces
the transfer of vibration between the engine
unit/cutting equipment and the machine's handle
unit.
The engine body, including the blades, is
suspended on the handlebar using four rubber
bushings.
Regularly check the vibration damping units for
cracks or deformation. Check that the vibration
damping element is undamaged and securely
attached.
WARNING! Overexposure to
vibration can lead to circulatory
damage or nerve damage in
people who have impaired
circulation. Contact your doctor
if you experience symptoms of
overexposure to vibration. Such
symptoms include numbness,
loss of feeling, tingling, pricking,
pain, loss of strength, changes
in skin colour or condition.
These symptoms normally
appear in the fingers, hands or
wrists. The risk increases at low
temperatures.