Additional Information; Safety Equipment; Explanation Of The Symbols On The Device - FLORABEST FBS 43 B2 Traduction Du Mode D'emploi D'origine

■ Adjust the line coil to the desired length. Avoid contacting small objects
GB
(e.g. rocks) with the line coil.
IE
■ Always hold the line coil on the fl oor when the device is in operation.
■ When trimming on a slope, always stand at a lower level than the cutting
tool. Never cut or trim on an icy, slippery hill or slope.
■ Before starting the engine, make sure that the line coil is not in contact
with any obstacles.
■ Do not use the device if it is damaged or defects are visible.
■ Always trim and cut using the high speed range. Do not let the engine
run at a low speed when starting mowing or trimming.
■ If the device accidentally comes into contact with a solid object, im-
mediately turn off the engine and inspect the device for damage.
■ Switch the device off before you put it down.
■ Always turn the engine off before working on the cutting tool.
IMPORTANT!

Additional information

■ Do not touch the exhaust.
■ Only use the device for the intended purpose, such as lawn trimming
and mowing activities.
■ Do not use the device for long periods, take regular breaks.
■ Do not operate the device under the infl uence of alcohol or drugs.
■ Only use the device if the appropriate protective hood has been
installed and is in good condition.
■ Any changes to the product may risk personal safety and void the
manufacturer's warranty.
■ Never use the device near highly fl ammable liquids or gases, either
in closed rooms or in the open. This may result in explosions and/or
fi re.
■ Do not use any other cutting tools. For your safety, only use accessories
and additional devices that are indicated in the operating instructions.
The use of parts other than those recommended in the operating
instructions, or other accessories, can put you at risk of injury.

Safety equipment

The relevant plastic protective hood to operate the cutting blade or line
must be installed when working with the device in order to prevent objects
from being slung away.
WARNING!
■ Never mow/trim while other individuals, especially children or animals,
are in the vicinity.
■ Maintain a safety distance of 15 m. Immediately turn off the device
if this distance is not maintained.
IMPORTANT! RISK OF POISONING!
■ Exhaust gases, fuel and lubricants are toxic. Exhaust gases must
never be inhaled.
4

Explanation of the symbols on the device!

Warning! Read the operating instruction before use!
Wear hearing protection!
Wear protective glasses!
Wear safe work boots!
Wear work gloves!
Wear head protection!
Protect the device against rain or moisture!
Beware of fl ung objects!
Turn the device off and remove the spark plug before
performing any maintenance work!
A distance of 15 metres must be maintained between
the machine and third parties!
The cutting tool continues running after it is turned off
(cutting blade/cutting line)!
Important, hot parts. Keep a safe distance away!
Add a little grease after every 20 hours of operation
20 h
(gear grease)
Beware of recoil!
Attention - petrol is highly fl ammable! Risk of explosion!
Do not spill fuel!
Attention! Risk of suff ocation!
Caution! Toxic CO vapours!
Do not use the device in closed rooms!
Caution! Risk of injury from rotating cutting blade!
Keep hands and feet away!
114
Sound power level L
Petrol/oil mix ratio information.
Fire, naked fl ames and smoking are prohibited!
Note! Left-hand thread.
Note! Assemble guide handle.
min
-1
Max. rotation per minute.
max. 9000
data in dB.
WA
FBS 43 B2