Condition:
The DAB/FM antenna is connected.
Fig. 34: FM Preset List
1.
Press the [MENU] button.
ð The display shows the [FM Preset List] text
(Fig. 34).
2.
Turn the click wheel until [FM Auto Search] is
displayed.
3.
Press the click wheel.
ð The display shows the [Auto Search YES] text.
4.
Press the click wheel again.
ð The automatic tuning is started. After the
search is complete, the device will jump to
the first station on the list.
11.1.2
Storing FM stations
Via the remote control
Fig. 35: Storing FM stations
1.
Press and hold one of the station preset buttons
on the remote control.
ð The display shows the station preset
(Fig. 35).
i
You can save up to 6 FM stations via the remote
control.
In the menu
1.
Press the [MENU] button.
ð The display shows the [FM Preset List] text.
2.
Turn the click wheel until [FM Preset store] is
shown.
ð The display shows the station preset.
3.
Press the click wheel to select the desired sta-
tion preset.
60
4.
Press the click wheel to save the station.
11.1.3
Accessing saved FM stations
1.
Briefly press one of the station preset buttons
on the remote control.
ð The selected station is played.
11.2
DAB radio
11.2.1
Finding a DAB station
Automatic tuning
Condition:
The DAB/FM antenna is connected.
Fig. 36: Automatically finding a DAB station
1.
In DAB playback mode, press the [MENU]
button.
ð The display shows [DAB Preset List] (Fig. 36).
2.
Turn the click wheel until [DAB Full Scan] is dis-
played.
3.
Press the click wheel on the device or the [OK]
button on the remote control to confirm the
selection.
ð The device now searches for available radio
stations and plays the first available station.
i
The station scan takes place automatically when
first switching to DAB mode or after resetting to
factory settings.
Manual tuning
Condition:
The DAB/FM antenna is connected.
Fig. 37: Manually tuning a DAB station
1.
In DAB playback mode, press the [MENU]
button.
ð The display shows [DAB Preset List].
© 2013