Ferm BGM1021 Traduction De La Notice Originale page 6

cool the workpiece being ground. Wood chisels and
the like should never be sharpened 'blue'. Take care
not to lose your grip on the object being ground,
as it may suddenly become jammed between the
tool rest and the grinding wheel. This can cause
the stone to shatter, the motor to seize, or the
workpiece to fly off, all of which can cause injury
and damage. Whenever the machine has been in
use for 30 minutes, it should be switched off. Allow
the machine to cool down to room temperature.
Operation
• Check that the switch is in the "OFF/0"
position before connecting the machine to the
power supply.
• Press the power switch into the " ON/1"
position to start your bench grinder.
• Always keep the power cord out of the way of
the tool's moving parts.
5. MAINTENANCE
Make sure that the machine is not live
when carrying out maintenance work on
the motor.
These machines have been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper machine care and regular
cleaning.
Trouble shooting
Should the machine fail to function correctly, a
number of possible causes and the appropriate
solutions are given below:
• The electric motor becomes hot
• The motor has become overloaded.
• Give the motor a chance to cool down.
• The motor is defective.
• Contact the service point.
• Machine switched on, but will not run
• There is a break in the power supply to the
machine.
• Check whether there is a break in the power
cord.
• The switch may be damaged.
• Contact the service point.
6
Repairs and servicing should only be
carried out by a qualified technician or
service firm.
Cleaning
Keep the ventilation slots of the machine clean to
prevent overheating of the engine. Regularly clean
the machine housing with a soft cloth, preferably
after each use. Keep the ventilation slots free from
dust and dirt. If the dirt does not come off use a
soft cloth moistened with soapy water. Never use
solvents such as petrol, alcohol, ammonia water,
etc. These solvents may damage the plastic parts.
Faults
Should a fault occur, e.g. after wear of a part,
please contact the service address on the
warranty card. In the back of this manual you find
an exploded view showing the parts that can be
ordered.
ENVIRONMENT
To prevent damage during transport, the
appliance is delivered in a solid packaging which
consists largely of reusable material. Therefore
please make use of options for recycling the
packaging.
Faulty and/or discarded electrical or
electronic apparatus have to be collected
at the appropriate recycling locations.
Only for EC countries
Do not dispose of power tools into domestic
waste. According to the European Guideline
2012/19/EU for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
WARRANTY
The guarantee conditions can be found on the
separately enclosed guarantee card.