Sample Installation Diagram - flamco Flamcomat Flexcon M-K -Fill P Installation Et Mode D'emploi

1.3

Sample installation diagram

Coupling assembly *
14
Supply temperature < 105 °C (STB < 110 °C)
Hot leg
Example of level-
controlled filling with a
Flamco-Fill P on a
Flexcon MK
Heater
Cold leg
D N *
Terminal
box
F l a m c o -F I L L P
Supply temperature < 105 °C (STB < 110 °C)
Hot leg
Example of
level-controlled
filling with a
Flamco-Fill P on a
Flexcon MK
Heater
Cold leg
Control module Flamcomat *
Cap valve**
Cap valve**
Control unit
PLC
M -K
Compressor
pressure maintenance
unit with
PLC control
L
Filling water inlet
Terminal (8, 9); 33, 34; 18, 19, 20 as per PLC
Please note: If the
return line is routed horizontally, implement the
connection from above (not from below) to avoid
additional contamination
.
*
Scope of supply, standard.
**
Accessories
To be provided by the customer: System inlet,
system outlet,
filling inlet, component couplings.
Filling water inlet
Terminal
box
Terminal (8, 9); 33, 34; 18, 19, 20 as per PLC
F l a m c o -F I L L P