Stihl HSE 52 Notice D'emploi page 18

English
e) Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools
with sharp cutting edges are less
likely to bind and are easier to
control.
g) Use the power tool, accessories
and tool bits etc. in accordance with
these instructions, taking into
account the working conditions and
the work to be performed. Use of the
power tool for operations different
from those intended could result in a
hazardous situation.
5) Service
a) Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
Hedge Trimmer Safety Warnings
Use both hands when operating the
–
hedge trimmer. Using one hand
could cause loss of control and
result in serious personal injury.
Keep all parts of the body away
–
from the cutter blade. Do not
remove cut material or hold material
to be cut when blades are moving.
Make sure the switch is off when
16
clearing jammed material. Blades
coast after turn off. A moment of
inattention while operating the
hedge trimmer may result in serious
personal injury.
DANGER
Keep hands away from blade.
–
Contact with blade will result in
serious personal injury.
Carry the hedge trimmer by the
–
handle with the cutter blade
stopped. Proper handling of the
hedge trimmer will reduce possible
personal injury from the cutter
blades.
Hold the power tool by insulated
–
gripping surfaces only, because the
cutter blade may contact hidden
wiring or its own cord. Cutter blades
contacting a "live" wire may make
exposed metal parts of the power
tool "live" and could give the
operator an electric shock.
Keep cable away from cutting area.
–
During operation the cable may be
hidden in shrubs and can be
accidentally cut by the blade.
HSE 52