Maintenance; Troubleshooting; Maintenance And Cleaning - TOOLCRAFT 1499514 Notice D'emploi

9. Maintenance

Always disconnect the compressed air hose reel from the compressed air supply before carrying
out any cleaning, maintenance or repair work.
• The product is low-maintenance and only contains a few parts that require maintenance. Repair work must be done
by a specialist technician.
• Keep the hose clean to ensure that the product works properly.
• Remove any dirt that accumulates on the connecting parts. Regularly check the valves to ensure that there are no
loose connections, leaks, cracks or other signs of damage.
• Check the connecting parts from time to time to ensure that there are no loose connections or signs of damage.

10. Troubleshooting

Always disconnect the compressed air hose reel from the compressed air supply before carrying out any
maintenance or repair work.
Fault
The hose does not wind
back onto the drum fully.
Air escapes from an
unsealed location.

11. Maintenance and cleaning

Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could damage the
housing or even impair the functioning of the product.
• Only use mild detergents to clean the compressed air hose.
• Use a dry, lint-free cloth to clean the frames and hose drum.
16
Possible cause
• The hose is tangled.
• The hose is damaged.
• The connector may be worn out.
Solution
• Unroll the hose and then roll it back onto
the drum in a straight line.
• Replace the hose (feeder hose or
compressed air outlet hose).
• Contact a technician to replace the
connector.