Copyright Protection; Declaration Of Conformity; Safety; General Information - Bartscher PRO 40T Mode D'emploi

NOTE!
Read the instruction manual carefully before using the device. The manufacturer does not
accept liability for any damage or malfunction resulting from not following the instructions
for use.
The instruction manual should be kept near the device, easily accessible for anyone wishing to
work with or using it. We reserve the right to make technical changes for purposes of developing
and improving the useful properties.

1.4 Copyright protection

The instruction manual including any texts, drawings, images or other illustrations is copyright. No
part of this publication may be reproduced, transmitted or used in any form or by any means
without permission in writing from the manufacturer. Any person who commits any unauthorized act
in relation to this publication shall be liable to claims for damages. All rights reserved.
NOTE!
The contents, texts, drawings, pictures and any other illustrations are copyright and subject
to other protection rights. Any person unlawfully using this publication is liable to criminal
prosecution.

1.5 Declaration of conformity

The device complies with the current standards and directives of the EU.
We certify this in the EC declaration of conformity.
If required we will be glad to send you the according declaration of conformity.

2. Safety

This section provides an overview of all important safety aspects.
In addition every chapter provides precise safety advice for the prevention of dangers which are
highlighted by the use of the above mentioned symbols.
Furthermore, attention should be paid to all pictograms, markers and labels on the device, which
must be kept in a permanent state of legibility.
By following all the important safety advice you gain an optimal protection against all hazards as
well as the assurance of a safe and trouble-free operation.

2.1 General Information

This device is designed in accordance with the presently applicable technological standards.
However, the device can pose a danger if handled improperly and inappropriately.
Knowing the contents of the instruction manual as well as avoiding mistakes and thus operating this
device safely and in a fault-free manner is very essential to protect yourselves from the hazards.
To prevent hazards and to ensure optimum efficiency, no modifications or alterations to the device
that are not explicitly approved by the manufacturer may be undertaken.
This device may only be operated in technically proper and safe condition.

2.2 Safety instructions for use of the device

The specifications regarding the industrial safety are based on the Regulations of the European
Union applicable at the time of manufacturing the device.
- 18 -