Starting A Programme - Zanussi ZDF22002WA Notice D'utilisation
Masquer les pouces
Voir aussi pour ZDF22002WA:
- Notice d'utilisation (60 pages) ,
- Notice d'utilisation (24 pages)
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ADDING MULTI-TABLETS
•
Do not fill the salt container and the rinse aid dispenser.
•
Set the rinse aid dispenser to the lowest position.
PROGRAMME SELECTION MODE
The appliance must be in Programme selection mode to start a programme. If the control panel does not
show this condition, do the Reset.
Press and hold simultaneously Delay and
RESET
With Reset you can cancel the running programme or the delay start. The appliance goes back to the
Programme selection mode.
STARTING A PROGRAMME
12
1
2
until the appliance is in programme selection mode.
Publicité
Table des Matières
