Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

1)
Gently lift the pump out of the fountain base.
2)
Remove the filter, unscrew the grill and remove the propeller.
3)
Clean all parts with warm soapy water. Use a cotton bud or a toothbrush to remove any dirt. For a more in-depth
cleaning, use white vinegar to clean the pump.
4)
Rinse all components thoroughly.
5)
Once they are clean and dry, re-assemble the pump components
Troubleshooting
The pump isn't working:
-
Make sure the plug is connected to the mains.
-
Remove the silicone tube from the pump while still connected. Wait for a few seconds, then insert the silicone tube back
into the pump.
-
Make sure that no residue has entered the pump and clean the pump.
The pump flow is erratic or gurgles:
-
Make sure the water level is between the MIN and MAX filling lines and add water in the water tank if needed.
-
Make sure the pump is fully immersed in water.
-
Make sure that no residue has entered the pump and clean the pump.
The pump is making abnormal noise and / or small air bubbles:
-
Make sure the water level is between the MIN and MAX filling lines and add water in the water tank if needed.
-
Make sure the pump is fully immersed in water.

Safety guidelines

WARNING: when using electrical appliances, basic safety precautions should always be followed, including the following:
-
Keep out of reach of children.
-
Only use product parts recommended or sold by the manufacturer.
-
Do not use outdoors. INTENDED FOR INDOOR USE ONLY.
-
Do not unplug the appliance by pulling on the power cord. To unplug the appliance, grasp the plug, not the power cord.
-
Do not operate the appliance if the cord or the plug are damaged, if the appliance malfunctions, or if the appliance has
been dropped or damaged in any manner.
-
Always unplug the appliance when not in use, before assembling or disassembling parts, and before cleaning.
-
Before connecting the appliance to the mains, ensure that the voltage input mentioned on the product matches your local
power voltage.
-
In the event of a pump dysfunction, do not attempt to repair it yourself.
Warranty
A. Troubleshooting
Should your product stop working or develop a fault, please read this guide over and make sure that the m alfunction is not
due to user error.
Propeller
Grill
Filter
10

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ngfon018

Table des Matières