Device Variants; Unpacking The Device; Checking The Device For Damage Sustained During Transportation; Placing The Device In Service - Mennekes AMAXX Notice D'utilisation

4.2 Device variants

The mobile receptacle combinations can differ from each
other due to customer-specific and/or country-specific speci-
fications, for example, in size, shape, and features.
In addition, components (such as receptacles) can be
installed that have visual, functional, and operating-relevant
differentiating characteristics.
Possible differentiating characteristics:
– Enclosure size / enclosure material / enclosure colour
– Enclosure with / without inspection window
– Inspection window with / without knurled screws
– Inspection window or enclosure cover with / without lock-
ing capability by means of padlock (optional)
– Different supply lines, plugs and appliance plugs (e.g. CEE
plugs Schuko® plugs)
– Different receptacles
– With / without protective elements (e.g. residual current
devices)
– Protection class version
For easier identification of the device, the function
identification (numbering) is additionally provided on
the outside of certain devices, this however may not
necessarily be consistent with the normative equip-
ment identification.
Further information on the specific device types and
information on the equipment and accessories can be
found in the current MENNEKES product catalogue or
online at www.MENNEKES.de.
8
5. Setting-up process

5.1 Unpacking the device

Unpack the device
• Do not use sharp or pointed objects for opening the
package to avoid damage to the device.
• Open the packaging and take out the device (1).
• Store the packaging (e.g. for return shipment of the device
if there is damage) or dispose of it in accordance with
applicable national regulations.
5.2 Checking the device for damage sus-
tained during transportation
• After unpacking, check the device for transport damage.
• If you determine that there is transport damage, contact
your dealer.
• Do not use a device that shows signs of damage.
5.3 Returning the device
If you want to return the device, use the original packaging
or a suitable, safe transport container.

5.4 Placing the device in service

The local ambient conditions must be taken into account
for safe operation of the device.
Ö
Please refer to the "Technical Data" chapter
Before using the device, ensure for yourself that the
connection data of the device agrees with the grid data.
The device must only be operated in agreement with the
local grid data.
Ö
see Rating plate
1