Protective Elements - Mennekes AMAXX Notice D'utilisation

• During operation keep the device in a clean and dry
location.
• Ensure that the device is not standing in water (puddles).
• Place the EverGUM distributor on the stand feet (1).
®
• Place the devices (2) (AMAXX
3KRAFT , DELTA BOX, EverGUM
®
rear of the enclosure.
6.3 Protective element
1
Protective element
For the most part the receptacle combinations are equipped
with protective elements (1) (D-type fuse links, RCDs, etc.
The protective elements are behind an inspection window
(2) or enclosure cover (3) as is the case with the EverGUM
distributor.
• Open the inspection window or the enclosure cover
(EverGUM distributor), to reach the protective elements.
®
Ö
See the following chapter
10
mobile, AirKRAFT
® ®
receptacle strip) on the
®
2 3
1
6.4 Opening/Closing the window
,
Opening/Closing the window
Depending on the version of the device, the inspection
window can be fitted with or without knurled screws, and
optionally it can be equipped with a padlock. Operation is
described using the AMAXX
operation is comparable for the device variants.
Opening
• If applicable, remove the padlock (1).
• Turn the knurled screws (2) counter-clockwise to loosen
them.
• Swing the inspection window upward (3).
®
Closing
• Swing the inspection window (3) downward until it
engages in the enclosure.
• Tightened the knurled screws (2) to restore the protection
class effect.
• Lock the inspection window, with the padlock if it is
present (1).
1
2
3
mobile device as the example;
®