EN
TROUBLESHOOTING
If the device does not work properly,
check whether you are able to rectify the
problem yourself. If the problem cannot
be solved with the steps below, contact
the customer service department.
Do not attempt to repair an elec-
trical device yourself!
The device does not work.
The blade attachment (9, 10) is not cor-
rectly screwed on the shaker.
► Correct the fit.
The blade attachment (9, 10) is not fitted
correctly in the motor unit (1).
► Correct the fit.
The mains plug is not inserted in the plug
socket correctly.
► Correct the fit.
The plug socket is defective.
► Try another plug socket.
There is no mains voltage.
► Check the fuse of the electrical dis-
tributor (fuse box).
The device switches off.
Food is blocking the blades.
► Detach the blade attachment (9, 10)
and carefully remove the blockage.
TECHNICAL DATA
Article number:
Model number:
Voltage supply:
Power:
Protection class:
ID of operating instructions:
All rights reserved.
20
The device is overloaded because the
contents are too thick or something has
become caught in the blades.
► Detach the blade attachment (9, 10)
and remove some of the contents or
add liquid and carefully remove the
blockage.
The device is overloaded because it was
switched on for too long without a break.
► Pull out the mains plug and allow
the device to cool down for a few
minutes.
DISPOSAL
09678
SBL3198AB
220 – 240 V~ 50 / 60 Hz
380 W
II
Z 09678 M DS V1 0920 md
Dispose of the packaging material
in an environmentally friendly man-
ner so that it can be recycled.
This device is governed by the
European Directive 2012/19/EU
on waste electrical and electron-
ic equipment (WEEE). Do not
dispose of this device as normal
domestic waste, but rather in an
environmentally friendly manner
via an officially approved waste
disposal company.