Before Initial Use; Use - gourmetmaxx SBL3198AB Mode D'emploi

EN
■
Always pull the mains plug and never
the mains cable to disconnect the
device from the mains power.
■
Do not carry or pull the device by the
connecting cable.
■
Lay the connecting cable in such
a way that it does not become
squashed or bent and does not come
into contact with hot surfaces.
■
Protect the device from heat, naked
flames, direct sunlight, extreme tem-
peratures and impacts. Also protect
the motor unit from wet conditions
and persistent moisture.
■
Do not place or lay any heavy objects
on the device or the connecting
cable.

BEFORE INITIAL USE

There may still be some production
residues on the device. To avoid harmful
effects to your health, clean the accesso-
ries thoroughly before using them for the
first time (see the "Cleaning and Storage"
chapter).

USE

Please Note!
■
Inspect the device for damage each
time before you use it. Only use it if it
is undamaged and has been correctly
assembled!
■
Never place the motor unit on a soft
surface. The ventilation openings on
the bottom of the motor unit must not
be covered.
■
Never insert the blade attachment
into the motor unit without a shaker.
■
This appliance may be operated un-
der both 50 Hz and 60 Hz without any
adjustment.
16
■
Do not move the device during op-
eration. Ensure sufficient stability and
hold the device firmly.
■
Do not detach the shaker from the
motor unit during operation. Before
detaching it, switch off the device and
wait until the blades have come to a
standstill.
■
The device is not suitable for constant
operation. Operate the cross-blade
attachment for no more than 1 minute
and the flat-blade attachment for no
more than 30 seconds without inter-
ruption to prevent the motor from
overheating. Then allow the device to
cool down for a few minutes before it
is switched on again.
L
We recommend also adding a lit-
tle liquid to the mixing container
when you want to process frozen
ingredients.
1. Place the motor unit (1) on a kitchen
unit or another dry, flat and stable
surface.
2. Fully unwind the connecting cable
and connect it to a plug socket.
3. Select a shaker (2, 3, 7 or 8) and add
the ingredients you want. When you
do this, do not exceed the maximum
fill level (marking on the shakers) !
4. Select a blade attachment:
○ The flat-blade attachment (10) is in-
tended to be used for grinding hard
and dry foodstuffs such as nuts,
Parmesan cheese or coffee beans. It
is not suitable for liquids!
○ The cross-blade attachment (9) is
intended to be used for chopping
up ice cubes, fruit, vegetables,
herbs and for blending, whipping
and stirring drinks and creams.
5. Screw the blade attachment clockwise
onto the shaker. IMPORTANT: The
plastic housing of the blade attach-
ment contains a sealing ring. This