Pelgrim IKR2083RVS Consignes D'installation page 28

INSTALLATION
7. Connect the main board flat connector cable (male-female) with the controls hanging down
from the induction hob (A).
8. Connect the main board connector (male – female), with the electronic water detection
sensors positioned inside the hood body (B).
9. It is now possible to connect from the outlet of the aspirator to the outside for the fumes
discharge through specific accessories and fittings available in specialized stores.
10. The entire pipeline will necessarily have to move under the base of the cabinet, in the kick
plate area.
EN 14