dirt and humidity. They must be read by every operator
before beginning work and observed conscientiously. Only
persons who have been trained in the use of the machine
and have been informed of the various dangers may work
with the machine. The required minimum age must be
observed.
In addition to the safety requirements contained in these
Operating Instructions and your country's applicable
regulations, you should observe the generally recognized
technical rules concerning the operation of woodworking
machines.
General notes
• After unpacking, check all parts for any transport dam-
age. Inform the supplier immediately of any faults. Lat-
er complaints cannot be considered.
• Make sure the delivery is complete.
• Before putting into operation, familiarize yourself with
the machine by carefully reading these instructions.
• Use only original accessories, wearing or replacement
parts. You can find replacement parts at your schep-
pach dealer.
• When ordering, include our item number and the type
and year of construction of the machine.
HC 6
Extent of delivery
Air hose (in the folding compartment)
Inflating gun with Manometer
Attachable nozzles (in drawer)
Technical data
Maximum operating
pressure, bars
Free air displacement
(FAD) l/min.
Air replacement (PD),
l/min.
Drive
Motor in V/Hz
Input W
Output W
Speed 1/min.
Noise level dB(A)
Subject to technical changes.
Compressor HC 6
Operating Instructions
8,0
120
180
230/50
1200
750
3750
93
international 7