Benning 044140 Notice D'emploi page 11

Measuring adapter for three-phase test objects
16 A CEE adapter, 5-pin, active (044140)
32 A CEE adapter, 5-pin, active (044141)
Measuring adapter for BENNING ST 720 Appliance Tester for testing three-phase electrical ap-
pliances under operating conditions
- measurement of the protective conductor resistance with polarity reversal
- measurement of the protective conductor current under operating conditions
Table of contents
1. User notes
2. Safety note
3. Scope of delivery
4. Description of the CEE measuring adapter (5-pin, active)
5. General information
6. Ambient conditions
7. Electrical specifications
8. Testing three-phase test objects by means of the CEE measuring adapter (5-pin, active)
9. Maintenance
10. Environmental note
1. User notes
These operating instructions are intended for
- qualified electricians, competent persons and
- electro technically trained persons
The measuring adapter is intended for measurements under dry ambient conditions (for details
see section 6: "Ambient conditions").
The following symbols are used in the operating manual and on the measuring adapter:
Warning of electrical danger!

Indicates instructions which must be followed to avoid danger to persons.
Important, comply with the documentation!

The symbol indicates that the information provided in the operating instructions must
be complied with in order to avoid risks.
This symbol on the measuring adapter means that the measuring adapter complies
with the relevant EU directives.

(AC) Alternating voltage or current.
Ground (Voltage against ground).
01/ 2011
Operating instructions
BENNING 044140/ 044141

7