Carbon Filter - Pkm 9031 Mode D'emploi

Carbon filter

1. Before you install any carbon filters: switch the appliance off and disconnect it
from the mains.
2. Remove the grease filters.
3. Fix the carbon filters on both sides of the motor housing. Each side of the
motor housing is equipped with a plastic filter bracket which has 3 lugs.
4. Align the lugs on the carbon filter with the lugs on the plastic filter bracket and
press firmly until the filter locks in place.
5. Replace the grease filters.
6. The suction capacity is decreased by installed carbon filters.
7. Carbon filters are not included in delivery.
8. Use carbon filters for recirculating mode only.
Motor housing
31