Carbon Filters - Pkm 9031 Mode D'emploi

Carbon filters

Conventional carbon and active carbon filters cannot be cleaned. The capacity
of these filters is limited. You can use such filters for about 3-6 months. Replace a
depleted filter. Find further information on the filter packaging.
5
POSSIBLE CAUSE
 The plug of the appliance is not
connected to the socket.
 The plug has become loose.
 The socket is not supplied with
energy.
 The fuse is switched off.
 ventilation damper blocked.
 motor mounting defective.
 motor defective
 one-way valve is leaky
 connection base chimney-telescopic
chimney is leaky
 motor not properly fixed
 hood not properly fixed
 too much distance hood-hob
 too much draught because of open
Minimum distance illuminate ↔ any objects/surfaces
e.g. lids, oven covers to avoid any risk of burns by hot
objects/surfaces and to avoid fire hazard.
Only use self shielded illuminants to avoid any risk of
burns by hot objects/surfaces or fire hazard and to
protect yourself from UV-radiation.
TROUBLE SHOOTING
MALFUNCTION
The appliance does not work at all.
Light is on but motor does not work.
Abnormal motor-smells.
Smear of oil.
Appliance vibrates.
Insufficient extracting capacity.
MEASURE
 Check the corresponding socket by
connecting it with another appliance.
 Check the fuse.
 The voltage is too low. Compare the
data on the model plate with the data
of your energy supplier.
 remove blockage.
 replace motor.
 replace motor
 seal the valve
 seal the connection with a suitable
material
 fix motor properly
 fix hood properly
 lower position of hood
 close the doors/windows
34
5