Grease Filter; Replacing Of The Illuminant - Pkm 9031 Mode D'emploi

6. Such changes do not influence the capacity of the appliance and are no reason
for complaint.
7. Do not use a steam cleaner. RISK OF ELECTRIC SHOCK!
8. Do not use any abrasive detergents.

Grease filter

You do not need to replace metal filters. Clean them once a month carefully by
hand. Do not use any acrid, abrasive or corrosive detergents!
Dry the filters properly before you reinstall them.

Replacing of the illuminant

Do not touch the illuminant with your hands. The sweat on your fingers will
reduce the operating time of your new illuminant. Use a thin cloth or a thin
glove.
1. Replace a defective illuminant immediately.
2. Disconnect the appliance from the mains.
3. Let the illuminant cool down before replacing.
4. Remove the installation-rim of the illuminant by turning it anticlockwise.
5. Take the illuminant off its holder and replace it by a new one of the same kind
and power.
6. Fix the installation-rim by turning it clockwise.
7. The maximum power of the illuminant must not be more than 28W.
Metal/aluminium
Do not clean the filters in a dishwasher;
otherwise you will damage the filters.
33