Pkm 9031 Mode D'emploi page 27

1. The data on the rating plate inside the
appliance must meet the data of your
energy supply.
2. Fix the one-way valve on the air outlet before installing the appliance.
3. Adjust the appliance relevant to the figure above. Drill four holes (diameter 8
mm/use the stencil) into the wall. Install the 4 dowels in the holes. Now screw
2 screws into the dowels (no. 1 and 2). The distance screw head ↔ wall must be
10 mm.
WARNING! Do not damage the wiring in the wall while drilling
27