Carbon Filter - Pkm 6004W Mode D'emploi

4. Lay the exhaust hose to the wall
outlet. Fix the exhaust hose with the
cable tie (1) on the wall-outlet.
5. Fix the top chimney on the installation bracket ( look also on step 8).
6. Insert the grease filters and connect the appliance to the mains
 Check the correct position of the hood from front and side perspective.
Otherwise the appliance will not work properly.

2.3 Carbon filter

1 open
If the socket is covered by the chimney, you must plug in the appliance at an
3
earlier point in
time.
Unplug the appliance before installing
the carbon filter.
For recirculating mode only.
2 close
26
3 .