Sony NSR-500 Série Manuel D'installation page 36

Caution
If you click the [Reload] button, the
automatic search is performed again.
Take care because apart from the user
name and password of the
administrator, all of the values you
entered up until now will be replaced
with the results obtained with the
automatic search.
When registration completes, the
following screen appears.
6
Click [Finish].
The devices are registered to NSR.
Proceed to "Configuring automatic record
settings" (page 38).
36 Step 3: Settings
Registering Devices Manually
Specify the IP address of a device to register
the device individually.
1
Select [Advanced Setup], and click
[Next].
The Configuration window appears.
2
Click [Device] at the top of the
Configuration window.
The Device Configuration screen
appears.
3
Click (Add).
The Add Device dialog box appears.